Click image to view full size image
HPET-112 PET Film Quick Details
Material: PET
Type: Stretch Film
Usage: Packaging Film
Feature: Moisture Proof
Hardness: Soft
Processing Type: Casting
Transparency: Translucent
Place of Origin: China (Mainland)
Norminal Thickness: 12um
Corona Discharge: NO corona discharge
Roll ID: 76.2mm(3''),152mm(6'')
Connector Number:≤1
Thickness: 8~75um
Application: printing
Packaging & Delivery
Packagingaccording to customer's requirements
Delivery
within 2 weeks after receiving the prepayment
Specifications
pet protective film for plastic
Optically brilliant, clear appearance
Features
1). Optically brilliant, clear appearance
2). Higher modulus and excellent tensile strength
3). Excellent dielectric properties
4). Good flatness and coefficient of friction (COF)
5). Tear-resistant and puncture-resistant characteristics
6).Wide range of thickness 8 micron up to 75 micron
7). Excellent dimensional stability over a wide range of temperatures
8). Very good resistance to most common solvents, moisture, oil, and grease
9). Excellent barrier against a wide range of gases.
10).Widely use for packaging, printing, laminating,metallizing, decroation, electrical insulation
Usage
Our products BOPET film (8-75um) can be widely used in the packaging of the food,medicine and other commodities,the industry application field such as the tape,the card,electrical insulation film.
Product specification | ||
Thickness |
Width |
Roll ID |
8~75μm |
380~2000mm |
76.2mm(3") , 152mm(6") |
Connector Number |
The connector number of each rollfor superior product:≤1; Base on the Standard length, connectorrate 0f each roll: ≤10%. |
|
Note: Other specifications of the film may beadjusted upon consumer request.Conventional length is equivalent to12 μm of 6,000 m, 12,000 m, 18,000 m, 24,000 m, etc. | ||
Typical propertyvalues
Item |
Units |
Typical Values |
Test Method |
|
Nominal thickness |
um |
12 |
DIN 53370 |
|
Thickness Deviation |
% |
±1.5 |
ASTM D 374 |
|
Tensile strength(MD/TD) |
MPa |
220/240 |
ASTM D 882 |
|
Elongation(MD/TD) |
% |
120/110 |
ASTM D 882 |
|
Heat Shrinkage(MD/TD)150°C,30min |
% |
1.8/0.3 |
ASTM D 1204 |
|
Haze |
% |
3 |
ASTM D 1003 |
|
Gloss |
% |
130 |
ASTM D 2457 |
|
Surface Wetting Tensions |
Corona Discharge |
Dyne/cm |
52 |
ASTM D 2578 |
|
NO corona Discharge |
|
40 |
|
E-mail: 